Order Products : sales@su-jiao.com
ICORENE® 9103 GW1 Natural 0000
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0W5ToD_ICORENE-9103-GW1-Natural-0000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 9103 GW1 NATURAL 0000 is a hexene high density polyethylene specifically developed for use in rotational moulding applications. This grade has a good balance of properties such as toughness, easy flow, stiffness and a glow wire (GW) flammability index of 750°C for 3mm thickness. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | > 0.943 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.2 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 20.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 1000 | % | ASTM D638 |
| Flexural Modulus | 850 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance (-20°C) | > 200 | J/cm | Internal Method |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Flammability Index (3.00 mm) | 750 | °C | IEC 60695-2-12 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MALAT 37W200 | AD majoris | PBT | MALAT |
| POLYLAC® PA-756 | CHI MEI CORPORATION | ABS | POLYLAC® |
| RTP EMI 1060.5 | RTP Company | PBT | RTP |
| ALFATER XL® D40I 3EF0001 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
| Latilub 66-15T K/30 | LATI S.p.A. | Nylon 66 | Latilub |
