Order Products : sales@su-jiao.com
FLEXITEQ™ F67A010UV
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Marplex Australia Pty. Ltd. |
| Trademark: | FLEXITEQ™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0TutYR_FLEXITEQ-F67A010UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FLEXITEQ™ F67A010UV is a formulation based on Santoprene™ rubber technology. It is formulated for extrusion including thin wall or complex profile applications in a pre-coloured material. FLEXITEQ™ F67A010UV is an improved UV resistant version and can be processed on conventional thermoplastic equipment for extrusion. It is polyolefin based and completely recyclable. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.978 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 67 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 4.50 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 230 | % | ASTM D412 |
| Tear Strength 3(23°C) | 21.0 | kN/m | ASTM D624 |
| Compression Set 4 | ASTM D395B | ||
| 23°C, 70 hr | 22 | % | ASTM D395B |
| 70°C, 22 hr | 31 | % | ASTM D395B |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Cylinder Zone 1 Temp. | 160 - 185 | °C | |
| Cylinder Zone 3 Temp. | 175 - 200 | °C | |
| Cylinder Zone 5 Temp. | 185 - 205 | °C | |
| Melt Temperature | 185 - 205 | °C | |
| Die Temperature | 185 - 205 | °C | |
| Back Pressure | 5.00 - 20.0 | MPa |
| Extrusion instructions |
|---|
| Typical Mesh Screen Combination: 20/40/60 |
| Note Message | |
|---|---|
| 1 . | C mold, 500 mm/min |
| 2 . | Mouth die C, 500 mm/min |
| 3 . | C mold, 500 mm/min |
| 4 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PP ABS HI112H | Performance Plastics, Ltd. | ABS | PP ABS |
| ARC ARC1500 | ARC Resin Corporation | ABS | ARC |
| KumhoSunny ABS HAG7220 | Shanghai KumhoSunny Plastics Co., Ltd. | ABS | KumhoSunny ABS |
| PERCOM® PHC31 | A. Schulman Europe | PP Copolymer | PERCOM® |
| Badatron® PPS GF30 TF15 | Bada AG | PPS | Badatron® |
