Order Products : sales@su-jiao.com
Lucent PC PC/ABS-1216LG
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Lucent Polymers, Inc. |
| Trademark: | Lucent PC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0T3M9r_Lucent-PC-PC-ABS-1216LG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polycarbonate + ABS, Injection Grade - Low Gloss Colors Available Add "R" for Added Release Add "U" for UV Stablilized |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 16 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.60 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 55.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 75 | % | ASTM D638 |
| Flexural Modulus | 2280 | MPa | ASTM D790 |
| Flexural Strength | 84.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 640 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 109 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBE Polyethylene L719 | UBE America, Inc. | PE, Unspecified | UBE Polyethylene |
| ASI POLYETHYLENE LP 502-01 | A. Schulman Inc. | HDPE, HMW | ASI POLYETHYLENE |
| Clariant Nylon 6 6008-L | Clariant Corporation | Nylon 6 | Clariant Nylon 6 |
| Hiflex CA 7600 A | LyondellBasell Industries | TPO (POE) | Hiflex |
| TECACOMP® PEEK 450 GF30 natural 9582 | Ensinger GmbH | PEEK | TECACOMP® |
