Order Products : sales@su-jiao.com
3M™ Dyneon™ PTFE Compound TF 4215
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ PTFE Compound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0QKlZd_3M-Dyneon-PTFE-Compound-TF-4215.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.12 | g/cm³ | ASTM D4745-06 |
| Apparent Density | 0.72 | g/cm³ | ASTM D4894-07 |
| Molding Shrinkage - Flow | 2.0 | % | ASTM D4894-07 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 16.8 | MPa | ASTM D4745-06 |
| Tensile Elongation 2(Break) | 170 | % | ASTM D4745-06 |
| Deformation Under Load | 4.40 | % | ASTM D621 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Compression Molding Molding Pressure | 80.0 | MPa | |
| Compression Molding Temperature | 23 to 26 | °C | |
| Sintering Temperature | < 365 | °C |
| Note Message | |
|---|---|
| 1 . | Measured on sintered moldings |
| 2 . | Measured on sintered moldings |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRE-ELEC® PE 1294 | Premix Oy | HDPE | PRE-ELEC® |
| Safrene® F 7665 | Safripol (PTY) LTD | HDPE | Safrene® |
| CALIBRE™ 503-5 TINT | Trinseo | PC | CALIBRE™ |
| Arak LLDPE LL0220CA | Shazand (Arak) Petrochemical Corporation | LLDPE | Arak LLDPE |
| Expandable PS F11MB | INEOS Styrenics International SA | PS (EPS) | Expandable PS |
