Order Products : sales@su-jiao.com
Formolene® DB5305A
| Category: | UHMWPE , Ultra High Molecular Weight Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0Q9Ecu_Formolene-DB5305A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene DB5305A is tailored for large part blow molding applications. Besides having excellent chemical resistance properties DB5305A HDPE has outstanding environmental stress crack resistance properties, and exceptional impact and creep resistance. Formolene DB5305A meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(c) 3.2a, covering safe use of polyolefin articles intended for direct food contact. Formolene DB5305A also meets all requirements of ASTM D4976-95 - PE 235. Suggested Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 5.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50) | > 1000 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 29.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | > 600 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 1340 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength (Compression Molded) | 452 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 73.9 | °C | ASTM D648 |
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Salflex 262EI | Salflex Polymers Ltd. | TPO (POE) | Salflex |
| Tufpet PBT G2630 | Mitsubishi Rayon America Inc. | PBT | Tufpet |
| Alathon® M6060 | LyondellBasell Industries | HDPE, MMW | Alathon® |
| Sylvin 7833-95C Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Thermec N™ 4314R15H | Technical Polymers, LLC | PPA | Thermec N™ |
