Order Products : sales@su-jiao.com
RTP 4285 TFE 5
| Category: | PI, TP , Thermoplastic Polyimide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0Pq8GL_RTP-4285-TFE-5.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18mm, injection molding | 0.20 | % | ASTM D955 |
| 6.35mm, injection molding | 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 20700 | MPa | ASTM D638 |
| Tensile Strength | 207 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 1.2 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 20700 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 303 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 110 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 480 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 316 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-0 | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 371 - 410 | °C | |
| Middle Temperature | 371 - 410 | °C | |
| Front Temperature | 371 - 410 | °C | |
| Mold Temperature | 177 - 232 | °C | |
| Injection Pressure | 138 - 193 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X4080U | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Mecoline I RDX 1213 F | Melos GmbH | TP, Unspecified | Mecoline |
| TECHNO ABS 330L | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
| Starflam PK0032E | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| DINALON® B1S25 H | Grupo Repol | Nylon 6 | DINALON® |
