Category: | Epoxy , Epoxy; Epoxide |
Manufacturer: | Epoxies, Etc. |
Trademark: | Epoxies, Ect. |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | 0MgUMh_Epoxies-Ect-10-3044.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
10-3044 is a two component epoxy adhesive and sealant. This structural adhesive has excellent chemical and heat resistance. 10-3044 is widely used as a stencil and screen adhesive due to its bonding strength and toughness. It has been used extensively to bond polyester mesh to aluminum frames and for the bonding of stainless steel foil to polyester mesh. Benefits:
|
General Information | |
---|---|
Features |
|
Uses |
|
Appearance |
|
Additional Information | Nominal Value | Unit | |
---|---|---|---|
Operating Temperature | -60.0 to 140 | °C |
Uncured Properties | Nominal Value | Unit | |
---|---|---|---|
Color | Green Grey White | ||
Mix Ratio by Weight (PBW) | |||
Part A | 100 | ||
Part B | 55 | ||
Mix Ratio by Volume (PBV) | |||
Part A | 100 | ||
Part B | 50 | ||
Density | |||
25°C 1 | 1.49 | g/cm³ | |
25°C 2 | 1.65 | g/cm³ | |
Viscosity | |||
25°C 3 | 110 | Pa·s | |
25°C 4 | 180 | Pa·s | |
Curing Time | |||
60°C | 0.17 | hr | |
54°C | 0.25 | hr | |
25°C | 2.0 | hr |
Cured Properties | Nominal Value | Unit | |
---|---|---|---|
Shore Hardness (Shore D) | 88 | ||
Lap Shear Strength | 20.7 | MPa | |
Electric Strength | 18 | kV/mm | |
Relative Permittivity (1 MHz) | 3.80 | ||
Dissipation Factor (1 MHz) | 0.060 |
Note Message | |
---|---|
1 . | Part A |
2 . | Part B |
3 . | Part B |
4 . | Part A |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
SABIC® STAMAX 30YM241 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® STAMAX |
STRANOX PP-ST40%LFT | Oxford Polymers | PP, Unspecified | STRANOX |
ChronoFlex® C 80A | CardioTech International, Inc. | PUR, Unspecified | ChronoFlex® |
DENILEN B 3010 CB | Vamp Tech | PP, Unspecified | DENILEN |
LNP™ LUBRICOMP™ RX93237 compound | SABIC Innovative Plastics Europe | Nylon 66 | LNP™ LUBRICOMP™ |