Order Products : sales@su-jiao.com
SUMIKASUPER® LCP E6007AS
| Category: | LCP , Liquid Crystal Polymer |
| Manufacturer: | Sumitomo Chemical Co., Ltd. |
| Trademark: | SUMIKASUPER® LCP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0LApWl_SUMIKASUPER-LCP-E6007AS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SUMIKASUPER LCP is a thermotropic liquid crystalline polyester, showing the highest heat resistance among engineering plastics. SUMIKASUPER LCP E6007AS is an antistatic grade that contains glass fiber reinforcement, an inorganic filler and an electroconductive component. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.63 | g/cm³ | ASTM D792 |
| Molding Shrinkage | Internal Method | ||
| Flow | 0.31 | % | |
| Across Flow | 1.1 | % | |
| Water Absorption (Saturation) | 0.020 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 121 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 6.8 | % | ASTM D638 |
| Flexural Modulus (23°C) | 9800 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 126 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (6.40 mm) | 340 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 274 | °C | ASTM D648 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Soldering Resistance | 300 | °C | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 to 150 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Regrind | 30 | % | |
| Rear Temperature | 300 to 320 | °C | |
| Middle Temperature | 320 to 350 | °C | |
| Front Temperature | 340 to 370 | °C | |
| Nozzle Temperature | 340 to 370 | °C | |
| Processing (Melt) Temp | 350 | °C | |
| Mold Temperature | 70.0 to 160 | °C | |
| Injection Pressure | 78.0 to 157 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 20.0 to 39.0 | MPa | |
| Back Pressure | 0.980 to 4.90 | MPa | |
| Screw Speed | 50 to 100 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 700 A FR | RTP Company | LDPE | RTP |
| TECHNYL® A 205F NATURAL | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| Ceramer 20 | Ceramer GmbH | PPSU | Ceramer |
| Fiberfil® J-60/30/E8/M | Fiberfil® Engineered Plastics Inc. | PP Homopolymer | Fiberfil® |
| Hylon® N2013HL | Ravago Manufacturing Americas, LLC | Nylon 6 | Hylon® |
