Order Products : sales@su-jiao.com
Dapol® D2102F
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Fudow Co., Ltd. |
| Trademark: | Dapol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0KR9q7_DapolD2102F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Examples of application
|
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.90 - 1.95 | g/cm³ | JIS K6911 |
| Molding Shrinkage 1 | 0.60 - 0.90 | % | JIS K6911 |
| Water absorption rate- boiling | 0.15 - 0.20 | % | JIS K6911 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | 240 - 250 | °C | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | JIS K6911 | ||
| after boiling | 1.0E+13 - 1.0E+14 | ohms | JIS K6911 |
| at ordinary state | 1.0E+14 - 1.0E+15 | ohms | JIS K6911 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Stress (Injection Molded) | 147 - 167 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (Injection Molded) | 5.9 - 7.8 | kJ/m² | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 12 - 14 | kV/mm | JIS K6911 |
| Dielectric Constant | 4.30 - 4.60 | JIS K6911 | |
| Dissipation Factor | 0.010 - 0.015 | JIS K6911 | |
| Arc Resistance | > 140 | sec | JIS K6911 |
| Comparative Tracking Index | > 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.38 mm) | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Injection Molding |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E Wire & Cable GTPO8102/R | S&E Specialty Polymers, LLC | TPO (POE) | S&E Wire & Cable |
| THERMOLAST® K TF9WKF (Series: DW) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Nylene® 7115 HS | Custom Resins Group | Nylon 6 | Nylene® |
| PLUSTEK PA604 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
| StarPet® 8025-0000 | Star Thermoplastic Alloys & Rubbers, Inc. | TPE | StarPet® |
