Order Products : sales@su-jiao.com
Sinpolene MBB1512
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinpolene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0KQ4lt_Sinpolene-MBB1512.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SINPOLENE MBB1512 is a masterbatch based on a medium jetness carbon black dispersed in polyethylene. It is designed specifically for use in tubular film blowing, blow moulding, extrusion and injection molding of polyolefins. The ingredients used in MBB1512 are approved by most regulations governing the contact of materials with food. SINPOLENE MBB1512 is delivered as free flowing pellets for processing convenience. CHARACTERISTICS * Easy processing * Good dispersion * High jetness * Good weather and UV light protection * Minimal wear effect on processing equipment |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/10.0 kg) | 10 - 30 | g/10 min | ASTM D1238 |
| Moisture Content | % | ASTM D3030 | |
| Carbon Black Content | 35 | % | ASTM D1603 |
| Additional Information |
|---|
| Recommended dosage: 1 - 3% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NYLEM® 66 GFR 25 | EMAS Plastik San.Tic.AS. | Nylon 66 | NYLEM® |
| ADENE BCJB | A.D. Compound spa | PP Homopolymer | ADENE |
| ARMAMID® PA TM 15.1 | Poly Plastic | Nylon 6 | ARMAMID® |
| Evoprene™ COGEE 626 | AlphaGary | SEBS | Evoprene™ COGEE |
| ExxonMobil™ HDPE HTA 001HP5 | ExxonMobil Chemical | HDPE, HMW | ExxonMobil™ HDPE |
