Order Products : sales@su-jiao.com
NuSil MED-9011
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0K8iog_NuSil-MED-9011.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chemistry of the fluid should not match the chemistry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance. Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects. Comments: LOW CONSISTENCY GREASE |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.03 | g/cm³ | |
| Viscosity | 100 | Pa·s |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RELENE® M24300 | Reliance Industries Limited | LLDPE | RELENE® |
| Tecoform® PO30 GB30 NL HS | Eurotec Engineering Plastics | Acetal (POM) Copolymer | Tecoform® |
| ARLEN™ C230 | Mitsui Chemicals America, Inc. | Nylon 6T | ARLEN™ |
| LNP™ STAT-KON™ OE002 compound | SABIC Innovative Plastics | PPS, Linear | LNP™ STAT-KON™ |
| O'Tech OW 840 AAG | O'Tech Corporation | PVC, Unspecified | O'Tech |
