Order Products : sales@su-jiao.com
SMOKEGUARD™ III 1071-A NATURAL
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | SMOKEGUARD™ III |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0ENeF0_SMOKEGUARD-III-1071-A-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A LEAD FREE, HIGHLY FLAME RETARDED, 75°C RATED, LOW SMOKE JACKET OR INSULATION COMPOUND FOR PLENUM CABLE CONSTRUCTIONS REQUIRING REQUIRING COMPLIANCE TO UL SUBJECT 910 MODIFIED STEINER TUNNEL TEST. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.55 - 1.59 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 64 - 70 | ASTM D2240 | |
| Shaw D, 15 seconds | 49 - 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.381 mm | 17.2 | MPa | ASTM D412 |
| 1.91 mm | 15.2 | MPa | ASTM D412 |
| Tensile Elongation | ASTM D412 | ||
| Fracture, 1.91mm | 200 | % | ASTM D412 |
| Fracture, 0.381mm | 180 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -10.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (23°C, 100 MHz) | 3.30 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.013 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 43 | % | ASTM D2863 |
| Smoke | 5.0 | % | ASTM D4100 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Extruder Screw Compression Ratio | 3.0:1.0 | ||
| Cylinder Zone 1 Temp. | 149 | °C | |
| Cylinder Zone 2 Temp. | 154 | °C | |
| Cylinder Zone 3 Temp. | 163 | °C | |
| Cylinder Zone 4 Temp. | 168 | °C | |
| Cylinder Zone 5 Temp. | 168 | °C | |
| Adapter Temperature | 154 | °C | |
| Melt Temperature | 179 - 185 | °C | |
| Die Temperature | 154 | °C |
| Extrusion instructions |
|---|
| Melt temperature is critical at temperature's above 370 degrees F foaming may occur. It may be necessary to adjust barrel temp to attain the desired melt temp. Material should be dried prior to use. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A TRC-100 | SHIN-A T&C | Epoxy | SHIN-A |
| NILAMID® A3 AL40 | Nilit Plastics | Nylon 66 | NILAMID® |
| AVP™ ZLL19CP | SABIC Innovative Plastics | PC | AVP™ |
| TechnoDur PBT4 GF 10 FR Natural (9981) | TechnoCompound GmbH | PBT | TechnoDur |
| CYCOLOY™ CX2244ME resin | SABIC Innovative Plastics | PC+ABS | CYCOLOY™ |
