Order Products : sales@su-jiao.com
Elastron® G G100.A80.B.E
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Elastron USA, Inc. |
| Trademark: | Elastron® G |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0EFwdg_Elastron-G-G100-A80-B-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers average physical properties and chemical resistance. Bondable to: PP, EVA, PE |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.00 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 1.9 | % | |
| Across Flow | 1.4 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 2.90 | MPa | |
| 300% Strain | 3.80 | MPa | |
| Tensile Strength (Break) | 7.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 550 | % | ASTM D412 |
| Tear Strength | 42.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 22 hr | 21 | % | |
| 70°C, 22 hr | 67 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 155 to 175 | °C | |
| Middle Temperature | 165 to 185 | °C | |
| Front Temperature | 175 to 195 | °C | |
| Nozzle Temperature | 195 to 225 | °C | |
| Mold Temperature | 25.0 to 50.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide RFC16 | Eurostar Engineering Plastics | Nylon 66/6 | Staramide |
| ACCUTECH™ CP0437C30L1 | ACLO Compounders Inc. | PP Copolymer | ACCUTECH™ |
| CarmelStat™ CS 1200 | Carmel Olefins Ltd. | PP, Unspecified | CarmelStat™ |
| Latiblend 5262 | LATI S.p.A. | Nylon+PP | Latiblend |
| Polifil® PP RMT-40 | The Plastics Group | PP Impact Copolymer | Polifil® PP |
