Order Products : sales@su-jiao.com
RX® 2-520
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | RX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 0E5XFF_RX-2-520.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RX® 2-520 is a short glass fiber reinforced, non-flame retardant, diallyl meta-phthalate molding compound, which meets the requirements of ASTM D5948 Type SIG |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.91 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.30 to 0.50 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.35 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 70.0 | MPa | ASTM D638 |
| Flexural Modulus | 17800 | MPa | ASTM D790 |
| Flexural Strength | 120 | MPa | ASTM D790 |
| Compressive Strength | 165 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 27 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | > 260 | °C | ASTM D648 |
| CLTE - Flow | 1.8E-5 | cm/cm/°C | ASTM E831 |
| RTI Elec | 130 | °C | UL 746 |
| RTI Imp | 130 | °C | UL 746 |
| RTI Str | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 14 | kV/mm | ASTM D149 |
| Dielectric Constant 1(1 MHz) | 4.00 | ASTM D150 | |
| Dissipation Factor 2(1 MHz) | 0.017 | ASTM D150 | |
| Arc Resistance | 170 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 25 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | Wet |
| 2 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 201 MS | RTP Company | Nylon 66 | RTP |
| RTP 200 TFE 2 | RTP Company | Nylon 66 | RTP |
| PROTEQ™ C18UST4L | Marplex Australia Pty. Ltd. | PP Copolymer | PROTEQ™ |
| Plaslube® PA6 ML2 | Techmer Engineered Solutions | Nylon 6 | Plaslube® |
| LEXAN™ CFR7431 resin | SABIC Innovative Plastics | PC | LEXAN™ |
