Order Products : sales@su-jiao.com

ALCUDIA® EBA PA-20020

Category:	EBA , Ethylene Butyl Acrylate Copolymer
Manufacturer:	REPSOL
Trademark:	ALCUDIA® EBA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	0DMe8K_ALCUDIA-EBA-PA-20020.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
EBA ALCUDIA® PA-20020 offers excellent flexibility and is suitable for injection moulding. The butyl acrylate content is 20%. It contains antioxidant and free flowing agent. TYPICAL APPLICATIONS Injection moulding Blends: microcrystalline and paraffin waxes Modification of asphalts Recommended melt temperature 180°C. EBA copolymers exhibit excellent thermal stability, which allows higher processing temperatures if needed. Processing characteristics of PA-20020 are similar to LDPE and conventional polyethylene extruders are recommended. Processing conditions should be optimised for each production line.

Message

EBA ALCUDIA® PA-20020 offers excellent flexibility and is suitable for injection moulding. The butyl acrylate content is 20%. It contains antioxidant and free flowing agent.

TYPICAL APPLICATIONS

Injection moulding

Blends: microcrystalline and paraffin waxes

Modification of asphalts

Recommended melt temperature 180°C. EBA copolymers exhibit excellent thermal stability, which allows higher processing temperatures if needed. Processing characteristics of PA-20020 are similar to LDPE and conventional polyethylene extruders are recommended. Processing conditions should be optimised for each production line.

General Information
Additive	Antioxidant Free Flowing Agent
Features	Antioxidant Food Contact Acceptable Good Flexibility
Uses	Asphalt Modification Blending
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density (23°C)	0.925	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	20	g/10 min	ISO 1133
n-Butyl Acrylate Content	20.0	wt%

Hardness	Nominal Value	Test Method
Shore Hardness		ISO 868
Shore A	87
Shore D	30

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)	8.00	MPa	ISO 527-2
Tensile Strain (Break)	720	%	ISO 527-2

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	52.0	°C	ISO 306/A
Melting Temperature	89.0	°C

Injection	Nominal Value	Unit
Processing (Melt) Temp	180	°C

Resin Grade	Manufacturer	Category	Trademark
ResMart Ultra HIPS 9	ResMart	PS (HIPS)	ResMart Ultra
Unipren® Elastomers A3 NTLA010 90A IM01S1 UP327	Petropol Industry and Trade of Polymers LTDA	TP, Unspecified	Unipren® Elastomers
FRAGOM LCX/3013	Crosspolimeri S.p.A.	Polyolefin, Unspecified	FRAGOM
HOPELEX PC-1150U	Lotte Chemical Corporation	PC	HOPELEX
InnoPlus HD8000F	PTT Global Chemical Public Company Limited	HDPE	InnoPlus