Boda BDF631P

Category: Fluorelastomer , Fluoroelastomer
Manufacturer: Chenguang Fluoro & Silicone Elastomers Co., Ltd.
Trademark: Boda
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: 09d29y_Boda-BDF631P.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
BDF631P is a medium to high viscosity curative incorporated fluoroelastomer copolymer.

This grade is well suited for application where good hot tear resistance and excellent mold release are required. BDF631P can be compounded to meet the major fluoroelastomer specifications.

BDF631P can be used for compression molding of oil seals or complicated geometries. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods.
General Information
Features
  • Copolymer
  • Good tear strength
  • Good demoulding performance
  • Medium and high viscosity
Uses
  • Composite
  • Seals
Appearance
  • White
Processing Method
  • Composite
  • Compression molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.80g/cm³
Mooney Viscosity (ML 1+10, 121°C)60MU
Fluorine Content 66%
Solubility LMW Ketones and esters
ElastomersNominal ValueUnitTest Method
MH 1(177°C)2.30N·m
ML 2(177°C)0.500N·m
t'90 3(177°C)2.5min
ts2 4(177°C)1.3min
HardnessNominal ValueUnitTest Method
Durometer Hardness 5(Shore A)76ASTM D2240
ElastomersNominal ValueUnitTest Method
Tensile Strength 6(Yield)14.0MPaASTM D412
Tensile Elongation 7(Break)260%ASTM D412
Compression Set (200°C, 70 hr)18%ASTM D395B
Additional Information
Test Compound: Polymer: 100 MT Black (N990): 30 phr MgO: 3 phr Ca(OH)2: 6 phr Curing Condition: Press: 10 min at 170°C Oven: 24 hr at 230°C
Note Message
1 .MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes
2 .MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes
3 .MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes
4 .MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes
5 .Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C
6 .Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C
7 .Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C
Resin Grade Manufacturer Category Trademark
Shuman PP 502C Shuman Plastics, Inc. PP Copolymer Shuman PP
Telcar® TL-4129 Teknor Apex Company TPE Telcar®
SLOVAMID® 66 SLS Plastcom Nylon 66 SLOVAMID® 66
ALKAMIX™ MB-6003 Marplex Australia Pty. Ltd. EAA ALKAMIX™
Sylvin 8200-70 Clear Sylvin Technologies Incorporated PVC, Flexible Sylvin