Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Extrusion L8230
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Extrusion |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 092gCa_Geon-Vinyl-Rigid-Extrusion-L8230.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™Vinyl Rigid Extrusion L8230 is a rigid PVC product,. It can be processed by extrusion and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Typical application areas are: handles. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | ASTM D792 |
| PVC Cell Classification | 10341 | ASTM D1784 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2600 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 46.7 | MPa | ASTM D638 |
| Flexural Modulus | 3240 | MPa | ASTM D790 |
| Flexural Strength | 86.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notch impact strength of suspension beam- Flow (23°C, 3.18 mm, Compression Molded) | 91 | J/m | ASTM D256A |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C 3 | 23.1 | J/cm | ASTM D4226 |
| 23°C 4 | 23.1 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 41.1 | °C | ASTM D648 |
| CLTE - Flow | 7.6E-5 | cm/cm/°C | ASTM D696 |
| Additional Information |
|---|
| 注释：分档是采用注塑模制样品进行缺口摆锤冲击试验确定的。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 182 - 193 | °C |
| Note Message | |
|---|---|
| 1 . | Type 1, 5.1 mm/min |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Procedure A, C.125 Throwing |
| 4 . | Procedure B, C.125 Throwing |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WPP PP PPH1MF2 | Washington Penn Plastic Co. Inc. | PP Homopolymer | WPP PP |
| KPOL-NYLON K-NY6/27W | KPOL Chem Co. | Nylon 6 | KPOL-NYLON |
| OP - ABS 20GF | Oxford Polymers | ABS | OP - ABS |
| POLYasa 2410F | Polykemi AB | ASA | POLYasa |
| Elastoprene HS5065A TR NAT | KMI Group, Inc. | TPE | Elastoprene |
