Order Products : sales@su-jiao.com
Hanwha Total PP BJ730
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | HANWHA TOTAL PETROCHEMICALS Co., Ltd. |
| Trademark: | Hanwha Total PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 07833Y_Hanwha-Total-PP-BJ730.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BJ730 is a high-flow block copolymer polypropylene resin for injection molding applications. This grade is designed to be processed in conventional injection molding equipment. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 27 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 91 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 28.4 | MPa | ASTM D638 |
| Fracture | 19.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 50 | % | ASTM D638 |
| Flexural Modulus | 1470 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C | 39 | J/m | ASTM D256 |
| 0°C | 49 | J/m | ASTM D256 |
| 23°C | 78 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 125 | °C | ASTM D648 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gloss | 50 | ASTM D2457 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 - 200 | °C | |
| Middle Temperature | 180 - 220 | °C | |
| Front Temperature | 210 - 250 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Pressure | 98.1 - 245 | MPa | |
| Holding Pressure | 78.5 - 226 | MPa |
| Injection instructions |
|---|
| Cooling Time: 25 to 40 sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYNIL® P50 L | Nilit Plastics | Nylon 66 | POLYNIL® |
| RONFALIN® C C120 | A. Schulman Europe | PC+ABS | RONFALIN® C |
| 4MID® 9B22130 I3 | 4Plas | Nylon 6 | 4MID® |
| Kemcor HDX 954 | Qenos Pty Ltd | HDPE Copolymer | Kemcor |
| Panlite® LN-2250Y | TEIJIN LIMITED | PC | Panlite® |
