Order Products : sales@su-jiao.com
Alpha PVC GW 2326-A-VW1 NAT LCF
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 06gCuU_Alpha-PVC-GW-2326-A-VW1-NAT-LCF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A 90°C RATED, LEAD FREE, LOW TEMPERATURE JACKETING COMPOUND. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 - 1.26 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 86 - 92 | ASTM D2240 | |
| Shaw A, 15 seconds | 78 - 84 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (1.27 mm) | 17.9 | MPa | ASTM D412 |
| Tensile Elongation (fracture, 1.27mm) | 330 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1 | UL Unspecified | ||
| 121°C, 168 hr | -5.0 | % | UL Unspecified |
| 121°C, 336 hr | -5.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2 | UL Unspecified | ||
| 121°C, 168 hr | -10 | % | UL Unspecified |
| 121°C, 336 hr | -10 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -48.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 28 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 149 | °C | |
| Cylinder Zone 2 Temp. | 154 | °C | |
| Cylinder Zone 3 Temp. | 163 | °C | |
| Cylinder Zone 4 Temp. | 168 | °C | |
| Cylinder Zone 5 Temp. | 168 | °C | |
| Adapter Temperature | 168 | °C | |
| Melt Temperature | 168 - 177 | °C | |
| Die Temperature | 168 | °C |
| Extrusion instructions |
|---|
| Screen Pack: 20/60/20Screw Design: Standard PVC metering screw with a 3-3.5:1 compression ratioPVC barrier or barrier . maddocksMaddocks mixing screw |
| Note Message | |
|---|---|
| 1 . | Thickness: 50 mil |
| 2 . | Thickness: 50 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1300 TC-I-20 SE | RTP Company | PPS | RTP |
| RAMTAL PMH2022 | Polyram Ram-On Industries | Acetal (POM) Homopolymer | RAMTAL |
| Tecomid® HT NT40 NL XA60 | Eurotec Engineering Plastics | PPA | Tecomid® HT |
| Carbotex K-20UV28 | Kotec Corporation | PC | Carbotex |
| DINALON® PA 6 30% CM | Grupo Repol | Nylon 6 | DINALON® |
