Order Products : sales@su-jiao.com
RheTech Polypropylene GC10P200-767UVBG
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | RheTech, Inc. |
| Trademark: | RheTech Polypropylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 05paaQ_RheTech-Polypropylene-GC10P200-767UVBG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 10% Glass Fiber Reinforced, Chemically Coupled, UV Stabilized, Polypropylene Copolymer, 9781 Light Grey, Blow Molding Grade |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.968 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.80 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 72 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 35.2 | MPa | ASTM D638 |
| Flexural Modulus | 2450 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 120 | J/m | ASTM D256 |
| Dart Drop Impact | 2.82 | J | ASTM D5420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 141 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 90.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 - 82.2 | °C | |
| Drying Time | 1.0 - 2.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 188 - 216 | °C | |
| Middle Temperature | 193 - 221 | °C | |
| Front Temperature | 199 - 227 | °C | |
| Nozzle Temperature | 188 - 227 | °C | |
| Mold Temperature | 26.7 - 82.2 | °C | |
| Injection Pressure | 2.76 - 10.3 | MPa | |
| Injection Rate | Slow-Moderate | ||
| Holding Pressure | 2.07 - 8.27 | MPa | |
| Back Pressure | 0.00 - 0.689 | MPa |
| Injection instructions |
|---|
| Injection Speed: Slow to ModerateScrew RPM: Screw Recovery 3 seconds Before Mold OpensCycle Time: Variable, Part Design Dependent |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PVC Film 165 NT | Teknor Apex Company | PVC, Flexible | PVC Film |
| TATREN® IM 100 85 | Slovnaft Petrochemicals, s.r.o. | PP Impact Copolymer | TATREN® |
| Novamid® 2320J | DSM Engineering Plastics | Nylon 66/6 | Novamid® |
| Nycast RX | Cast Nylons Ltd. | Nylon 6 | Nycast |
| Karina BLACK PVC COMPOUND 809D48/ 1-C-IS-AS-LMP | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
