Order Products : sales@su-jiao.com
APEX® 130-P
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Company |
| Trademark: | APEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 04GmMe_APEX-130-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
APEX®130-P is a flexible polyvinyl chloride material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is: extrusion. APEX®The main features of 130-P are:
APEX®The typical application fields of 130-P are: wire and cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Wire Types |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.38 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.8 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 81 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 15.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 350 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 75.0 | °C | ASTM D794 |
| Brittleness Temperature | -29.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 26 | % | ASTM D2863 |
| Additional Information |
|---|
| UL认证部件，PVC 300小时耐日光性护套材料，QMTT2。UL认证部件，PVC 720小时耐日光性绝缘与护套材料，QMTT2温度额定值：80 °C耐日光性UL认证：是最大伸长保持率，UL 1581，烘箱老化，7天，113°C：89 % 拉伸强度保持率，UL 1581，烘箱老化，7天，113°C： 103 % |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 179 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Veroplas 055 | PlastxWorld Inc. | SAN | Veroplas |
| Cheng Yu A705G3 | Cheng Yu Plastic Company Limited | ABS | Cheng Yu |
| Gramid N200GL | Grand Pacific Petrochemical Corporation | Nylon 66 | Gramid |
| SD POLYCA™ IM5101V | Sumika Styron Polycarbonate Limited | PC | SD POLYCA™ |
| EXTEM™ XH1015 resin | SABIC Innovative Plastics | PI, TP | EXTEM™ |
