Order Products : sales@su-jiao.com
BorShape™ FX1001
| Category: | LPE Terpolymer , Linear Polyethylene Terpolymer |
| Manufacturer: | Borealis AG |
| Trademark: | BorShape™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 03lpOd_BorShape-FX1001.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BorShape FX1001 is a blown film grade. It is a high alpha olefin terpolymer polyethylene film grade combining very good extrusion behaviour and superior mechanical properties, which are kept in cold conditions BorShape FX1001 has been developed especially for applications requiring high toughness at high stiffness levels. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.931 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/21.0 kg | 20 | g/10 min | |
| 190°C/5.0 kg | 0.90 | g/10 min |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (Dynamic) | 0.40 | ISO 8295 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-3 | ||
| MD | 350 | MPa | |
| TD | 450 | MPa | |
| Tensile Strength | ISO 527-3 | ||
| MD | 50.0 | MPa | |
| TD | 40.0 | MPa | |
| Tensile Elongation | ISO 527-3 | ||
| MD : Break | 450 | % | |
| TD : Break | 700 | % | |
| Dart Drop Impact | 480 | g | ISO 7765-1 |
| Instrumented Dart Impact 2 | 28.0 | J | ISO 7765-2 |
| Trouser Tear Resistance | ISO 6383-1 | ||
| MD | 60.0 | N/mm | |
| TD | 250 | N/mm |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 127 | °C | ISO 11357-3 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss | 7 | ASTM D2457 | |
| Haze | 80 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | Base Resin |
| 2 . | Total Penetration Energy |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Miramid® SX30CW | BASF Leuna GmbH | Nylon 66 | Miramid® |
| Tufel® II 94405 | Momentive Performance Materials Inc. | Silicone | Tufel® II |
| LubriOne™ AT-000/05T | PolyOne Corporation | Acetal (POM) Copolymer | LubriOne™ |
| LUVOCOM® 1114-8364 | Lehmann & Voss & Co. | PAEK | LUVOCOM® |
| ULTEM™ 2100R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
