Order Products : sales@su-jiao.com
LNP™ THERMOTUF™ VX99809 compound
| Category: | Nylon, Unspecified , Polyamide |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ THERMOTUF™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 01YnK3_LNP-THERMOTUF-VX99809-compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP THERMOTUF VX99809 is a compound based on Super Tough Nylon resin containing Proprietary Filler(s). Added faeture of this material is: High Impact. Also known as: LNP* THERMOTUF* Compound PDX-V-99809 Product reorder name: VX99809 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 24 hr | 2.0 to 3.0 | % | |
| Across Flow : 24 hr | 2.0 to 3.0 | % | |
| Water Absorption | |||
| 24 hr, 50% RH | 0.92 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 1.9 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 1980 | MPa | ASTM D638 |
| -- | 1880 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Yield 2 | 43.3 | MPa | ASTM D638 |
| Yield | 42.2 | MPa | ISO 527-2/5 |
| Break 3 | 40.7 | MPa | ASTM D638 |
| Break | 41.5 | MPa | ISO 527-2/5 |
| Tensile Elongation | |||
| Yield 4 | 3.9 | % | ASTM D638 |
| Yield | 3.7 | % | ISO 527-2/5 |
| Break 5 | 75 | % | ASTM D638 |
| Break | 130 | % | ISO 527-2/5 |
| Flexural Modulus | |||
| 50.0 mm Span 6 | 1220 | MPa | ASTM D790 |
| -- 7 | 1300 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 890 | J/m | ASTM D256 |
| 23°C 8 | 83 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 1300 | J/m | ASTM D4812 |
| 23°C 9 | 150 | kJ/m² | ISO 180/1U |
| Multi-Axial Instrumented Impact Energy | 49.9 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, 3.20 mm | 178 | °C | ASTM D648 |
| 0.45 MPa, Unannealed, 64.0 mm Span 10 | 100 | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed, 3.20 mm | 49.0 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 64.0 mm Span 11 | 48.0 | °C | ISO 75-2/Af |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.15 | % | |
| Rear Temperature | 260 to 271 | °C | |
| Middle Temperature | 277 to 288 | °C | |
| Front Temperature | 293 to 304 | °C | |
| Processing (Melt) Temp | 282 to 293 | °C | |
| Mold Temperature | 93.3 to 110 | °C | |
| Back Pressure | 0.172 to 0.344 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | Type I, 5.0 mm/min |
| 3 . | Type I, 5.0 mm/min |
| 4 . | Type I, 5.0 mm/min |
| 5 . | Type I, 5.0 mm/min |
| 6 . | 1.3 mm/min |
| 7 . | 2.0 mm/min |
| 8 . | 80*10*4 |
| 9 . | 80*10*4 |
| 10 . | 80*10*4 mm |
| 11 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vapolen 240 CTP | Vatan Plastik San. Tic. AS | PP, Unspecified | Vapolen |
| Elastocon® 8058N | Elastocon TPE Technologies | TPE | Elastocon® |
| KOPHOS® KO1385 | Kolon Plastics, Inc. | PC | KOPHOS® |
| KYOCERA KE-G3000DA | KYOCERA Chemical Corporation | Epoxy | KYOCERA |
| Sylvin 5175-92 White 1471 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
